Language:

To create value for customers, to be proud
of customers' continuous satisfaction

comtact us

Home / All / Steel Bars / Alloy Steel Bars /

SCM415 Alloy Steel Round Bar

Categories	Alloy Steel Bars
Brand	fushun
Model	SCM415
Delivery Condition	normalised and tempered/softened
Update Time	Apr 27,2024

Contact Now

Favorites

Detail Information

SCM415 Alloy Steel

SCM415 whose surface are processed through carburizing hardening treatment are used for the parts which need high toughness or wear resistance, such as cylinder piston, crankshaft, gears, pin, shafts and so on.

SCM415 Steel is a high quality Quenched and Tempered Alloy Structural steel, It belong to the high quality medium carbon, Oil Quenched & Tempered Hardenss is 28-34 HRc.SCM415 Annealing delivery hardenss less than 250HB.

Our supply size :

Diameter : 80 to 600 mm ;

Length : 1000 to 9000 mm ;

Our advantage :

1. High Quality, Reasonable Price

2. Over 40 Years Experience

3. ISO NQA Certificated Factory

4. Worldwide shipping

5. Emergency Orders and Fast Delivery

International Comparison of Materials

INTER ISO	JAPAN	GERMANY	CHINA
INTER ISO	JIS	DIN	GB
15CrMo4	SCM415	15CrMo5	15CrMo

Chemical Composition(JIS G4051)

C(%)	Si(%)	Mn(%)	P(%)	S(%)	Ni(%)	Cr(%)	Mo(%)	Cu(%)
0.13-0.18	0.15-0.35	0.6-0.85	0≦0.03	0≦0.03	0≦0.25	0.9-1.2	0.15-0.30	0≦0.3

Applications

SCM415 steel is a alloy structural steel. It is used for engineering structural, like high tensile shafts, bolts and nuts, gears, pinions and spindles. Locomotive traction with the big gear, supercharger drive gear, pressure vessel, rear axle, gear load of connecting rod and a spring clip,SCM415 can also be used to under 2000 m deep well of oil drill pipe joint and the fishing Alloy, and can be used for bending machine mould, etc

Product Features:

1. High strength in room temperature and elevated temperature.

2. High notch tolerance.

3. Simplified design for bolting configuration

Conditions of heat treatment

Annealing: 850℃ Furnace Cooling

Normalization: 850~900℃ Air Cooling

Hardening: 850~900℃ 1st Oil Cooling, 800~850℃ 2rd Oil Cooling

Tempering: 150~200℃ Air Cooling

Criterion for heat treating conditions revise:

Ac: 770~835℃

Ar: 770~700℃

Ms: 410℃

Mechanical properties

Tensile strength (kgf/mm²): ≧85

Elongation (%): ≧16

Cross section reduction rate (%): ≧40

Impact value (J/cm2): ≧7

Hardness (Hb) : 235~321

Forming Option

1 Hot rolling process

2 Hot Forging: Electro-hydraulic; High-speed-hydraulic; Oil-hydraulic; Precision-forging

Heat-treatment Option

1 +A: Annealed (full/soft/spheroidizing)

2 +N: Normalized

3 +NT: Normalized and tempered

4 +QT: Quenched and tempered (water/oil)

Surface Option

1 Black Surface

2 Grounded: Bright but rough ; Not precision

3 Machining for plate: Bright and precision; Little turning scar

4 Peeled/Turned: Bright and precision; Little turning scar

5 Polished: Very Bright and precision size; Not turning scar

Other Services

1 Cutting: Small pieces

2 CNC Machine: Produce as your drawing

3 Package: Bare/Nylon/Canvas/Wooden

4 Payment:T/T, L/C, O/A(request credit)

5 Transport:FOB/CFR/CIF/DDU/DDP (train/ship/Air)

Mill test certificate

EN 10204/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing.