JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile

Categories	Hollow Bars
Brand	fushun
Model	JIS G3472
Delivery condition	+A or +N
Surface condition	smooth
Update Time	Apr 20,2024

Contact Now

Favorites

Detail Information

JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile

G3472 Welded Steel Tubes manufacture

The tubes shall be manufactured from hot finished welded tubes by cold drawing. Other suitable methods of cold working are permitted. The tubes shall be delivered in the delivery condition +N which means that after the final cold drawing operation the tubes are normalized in a controlled atmosphere.All non-destructive testing (NDT) activities shall be carried out by qualified and competent level 1, 2 and/or 3 personnel authorised to operate.

Benefits Of G3472 Welded Steel Tubes

Higher Strength & Hardness Properties

Size Accuracy

Enhanced Appearance

Uniform Micro-structure

Easier To Machine

Superior Finish In Subsequent Manipulations

G3472 welded Steel Tubes Applications

1.Hydraulic Cylinders

2.Auto and Truck Axles

3.Suspension parts and shock absorbers

4.High Speed Shafts and rollers

5.Bearings and Spacers

6.Roll cages

7.Agricultural components and many other machined tubular parts.

G3472 welded Steel Tubes Sizes and tolerances

Specified outside diameter with tolerance: 4 (+/-0,08) to 300 (+/-0,35) mm

Specified inside diameter with tolerance: 2 (+/-0,15) to 100 (+/-0,35) mm

Lengths: standard length of 6 m ; exact length ; other length

Straightness: The deviation from straightness of any tube length L shall not exceed 0,0015 L. Deviations from straightness over any one metre length shall not exceed 3 mm.

Standards

JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile

G3472 welded Steel Tubes Chemical Component

Symbol of grade	C	Si	Mn	P	S
STAM290GA	0.12 max.	0.35 max.	0.60 max.	0.035 max.	0.035 max.
STAM290GB	0.12 max.	0.35 max.	0.60 max.	0.035 max.	0.035 max.
STAM340G	0.20 max.	0.35 max.	0.60 max.	0.035 max.	0.035 max.
STAM390G	0.25 max.	0.35 max.	0.30 to 0.90	0.035 max.	0.035 max.
STAM440G	0.25 max.	0.35 max.	0.30 to 0.90	0.035 max.	0.035 max.
STAM440H	0.25 max.	0.35 max.	0.30 to 0.90	0.035 max.	0.035 max.
STAM470G	0.25 max.	0.35 max.	0.30 to 0.90	0.035 max.	0.035 max.
STAM470H	0.25 max.	0.35 max.	0.30 to 0.90	0.035 max.	0.035 max.
STAM500G	0.30 max.	0.35 max.	0.30 to 1.00	0.035 max.	0.035 max.
STAM500H	0.30 max.	0.35 max.	0.30 to 1.00	0.035 max.	0.035 max.
STAM540H	0.30 max.	0.35 max.	0.30 to 1.00	0.035 max.	0.035 max.

G3472 Welded Steel Tubes Appearance

The internal and external surface finish of the tubes shall be typical of the manufacturing process and the heat treatment, and it shall be such that any surface imperfections such as ridges, dents or shallow grooves requiring dressing can be identified. It shall be permissible to dress, by grinding or machining, surface imperfections provided that, after doing so, the dimensions are within the specified tolerances. All dressed areas shall blend smoothly into the contour of the tube. Surface imperfections which encroach on the specified minimum wall thickness shall be considered defects and tubes containing these shall be deemed not to conform to this part of EN 10305.The tubes shall have smooth outer and inner surfaces with a roughness Ra 4 um, unless a reduced roughness of Ra 2 um is specified for the inner surface is specified.