Home / All / Steel Wires / Patented Spring Steel Wires /

Carbon Steel Wire for Zigzag and Square-form Springs

Carbon Steel Wire for Zigzag and Square-form Springs

Carbon Steel Wire for Zigzag and Square-form Springs
CategoriesPatented Spring Steel Wires
Brandfushun
Update TimeMar 29,2024
Detail Information

Carbon Steel Wire for Zigzag and Square-form Springs

 

patented cold drawn plain carbon steel round wire, suitable for forming into zigzag and square-form springs used in the production of seat and back units for cars and certain types of domestic upholstery. Wire to this standard is not intended for use in the manufacture of mechanical springs.

 

Zigzag/Square-form Springs Steel Wire Chemical composition

Carbon 0.45-0.85

Silicon 0.35

Manganese 0.40-1.00

Sulphur 0.050

Phosphorous 0.050

 

Zigzag/Square-form Springs Steel Wire Standard sizes and diameter tolerances

Maximum ovality 0.03mm

Tolerance on diameter ± 0.03mm

 

Standard sizes and tensile strengths for wire for square-form springs


Standard size (nominal diameter) Tensile strength
Grade 1 Grade 2
mm N/mm2 N/mm2
2.3 1 550/1 720 1 600/1 770
2.65 1 500/1 670 1 550/1 720
3.07 1 500/1 670 1 550/1 720
3.25 1 500/1 670 1 550/1 720
3.45 1 450/1 620 1 500/1 670
3.75 1 350/1 520 1 400/1 570
4 1 350/1 520 1 400/1 570
4.12 1 350/1 520 1 400/1 570


Standard sizes and tensile strengths for wire for zigzag springs


Standard size (nominal diameter) Tensile strength
Grade 1 Grade 2 Grade 3
mm N/mm2 N/mm2 N/mm2
2 1 600/1 770 1 650/1 820 1 700/1 870
2.12 1 600/1 770 1 650/1 820 1 700/1 870
2.24 1 600/1 770 1 650/1 820 1 700/1 870
2.36 1 600/1 770 1 650/1 820 1 700/1 870
2.5 1 550/1 720 1 600/1 770 1 700/1 870
2.65 1 550/1 720 1 600/1 770 1 700/1 870
2.8 1 550/1 720 1 600/1 770 1 700/1 870
3 1 500/1 670 1 600/1 770 1 700/1 870
3.07 1 500/1 670 1 600/1 770 1 700/1 870
3.15 1 500/1 670 1 600/1 770 1 700/1 870
3.25 1 500/1 670 1 550/1 720 1 700/1 870
3.35 1 500/1 670 1 550/1 720 1 700/1 870
3.45 1 450/1 620 1 550/1 720 1 650/1 820
3.55 1 450/1 620 1 550/1 720 1 650/1 820
3.65 1 450/1 620 1 550/1 720 1 600/1 770
3.75 1 400/1 570 1 550/1 720 1 600/1 770
4 1 400/1 570 1 550/1 720 1 600/1 770
4.12 1 400/1 570 1 500/1 670 1 600/1 770
4.25 1 400/1 570 1 500/1 670 1 550/1 720
4.5 1 400/1 570 1 450/1 620 1 500/1 670
4.75 1 400/1 570 1 450/1 620 1 500/1 670
4.87 1 400/1 570 1 450/1 620 1 500/1 670


Zigzag/Square-form Springs Steel Wire Finished wire

Freedom from defects.

The finished wire shall be free from harmful surface defects, pipe and segregation.

Condition. The wire shall be supplied in a smooth, bright drawn condition, unless otherwise specified. The wire may be supplied with a galvanized or other coating, when so specified by the purchaser on his order. The coating requirements shall be the subject of an agreement between the manufacturer and the purchaser.  Wire supplied in coil form shall lie dead and shall be free from any corkscrew set.

 

Zigzag/Square-form Springs Steel Wire Packing and identification

The wire shall be securely tied and shall carry a suitable label or labels on which shall be shown the information indicated in Clause 2. Any other markings shall be agreed between the purchaser and the manufacturer.

Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
CONTACT PERSON
Name:
Florence Tang
Tel:

86-731-89903933

Email:
Address:
ADD: No. 812-813, Floor 8, Building C2, Yongsheng Commercial Plaza, 222 Labor East Road, Yuhua District, Changsha City, Hunan, China.
NEWSLETTER

sign up for the latest catalogue, new design and promotion

follow us