Home > Products > Steel Strips > Low Carbon Cold Rolled Steel Strips >

Low Carbon Cold Rolled Steel Strips

Low Carbon Cold Rolled Steel Strips

Low Carbon Cold Rolled Steel Strips
CategoriesLow Carbon Cold Rolled Steel Strips
AlbumView larger image
Width range:50-2000 mm
Thickness range:0.1-3 mm
Delivery condition:Soft, Hard
Surface conditionSmooth, Bright
Terms of PaymentL/C, D/A, D/P
Update Time2019-11-22
Detail Information

1. Description:

The cold rolled strip is a steel product that is produced from a hot rolled strip that has been pickled. The coil is then reduced by a single stand cold roll steel mill straight away or reversing mill or in a tandem mill consisting of several single stands in a series. The strip is reduced to approximately final thickness by cold-rolling directly, or with the inclusion of an annealing operation at some intermediate thickness to facilitate further cold reduction or to obtain mechanical properties desired in the finished product. The coil is then slit to the desired width through the process of roll slitting.

2. Application:

The cold rolled steel strip is used in body panels and automotive components, tubes, appliances such as refrigerators, washers and dryers, building materials as well as electrical components.  

3. Quality Standard & Steel:

DIN 1623 Cold rolled strip and sheet

JIS G3141 Cold reduced carbon steel sheets and strip

BS EN 10130 Cold-rolled low-carbon steel flat products for cold forming

ISO 4997 Cold-reduced carbon steel sheet of structural quality

GB/T 11253 Cold-rolled sheets and strip of carbon structural steels

GB/T 13237 Cold rolled quality carbon structural steel sheets and strips

4. Chemical Composition(%):

DIN: ST 12, ST 14, ST 15, ST 16


BS EN: DC01, DC03, DC04, DC05, DC06

ISO: CR 220, CR 250, CR 320, CR550

GB/T: Q195, Q215, Q235, Q275

GB/T: 08AI, 08, 10, 15, 20, 25, 30, 35, 40, 45

5. Delivery Condition:

Soft(annealed and skin-passed)

Full hard(cold rolled end)


Surface Finish:

Bright(Ra ≤0.4μm),

Semi-bright(Ra ≤0.9μm),

Normal(0.6μm Ra ≤1.9μm),




The cold rolled steel strip normally delivered oiled and bundled with platic sheet.

This package will show no corrosion for up 3 months.

Wrapped steel strip in coils with wooden or steel pallent for protection in transportation.

Special customized package is acceptable upon customer’s request.

Related Products
    Please send your message to us

    Agree to use terms of service

    Florence Tang
    leave a message:
    Contact Now
    ADD: Room 2014, 20th Floor, Building C1, CIFI International Plaza, No. 222 of Laodong East Road, Changsha, Hunan, China

    sign up for the latest catalogue, new design and promotion

    follow us