17MoV8-4 1.5406 Forged Alloy Steel Round Bar

Categories	Alloy Steel Bars
Brand	fushun
Model	17MoV8-4 1.5406
Delivery Condition	+N or +A or +QT
Surface Condition	Black or Turned or Polished
Update Time	Apr 29,2024

Contact Now

Favorites

Detail Information

17MoV8-4 is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
Bars are usually supplied black/bright in the annealed condition.

Applications:
Commonly used in industries such as offshore, marine, food, paper mills, oil field and aerospace. 17MoV8-4 is used for components such as fasteners, couplings, screws, bushings, studs, fittings, valve stems, roller, wear rings.

Our supply size :

Diameter : 80 to 600 mm ;

Length : 1000 to 9000 mm ;

Our capacity :

Delivery condition : Normalized, or Annealed, or Quenched and Tempered ;

Surface condition : Grounded, or Turned, or Polished

Our advantage :

1. High Quality, Reasonable Price

2. Over 40 Years Experience

3. ISO NQA Certificated Factory

4. Worldwide shipping

5. Emergency Orders and Fast Delivery

All Grades Comparison

DIN EN	W-Nr
17MoV8-4	W-Nr 1.5406

Chemical Composition (Weight %)

C	Si	Mn	P	S	Cr	Ni	Mo	Other
0.14 ～ 0.22	0.15 ～ 0.35	0.50 ～ 0.80	≤ 0.035	≤ 0.035	0.20 ～ 0.40	≤ 0.30	0.80 ～ 1.00	V 0.30 ～ 0.40

Mechanical Properties

Condition of heat treatment	Tensile	Yield	Elongation	Reduction in cross	Impact	Brinell
	Rm(MPa)	Rp0.2(MPa)	A(%)	section on fracture	AKV/AKU(J)	Hardness(HBW)
	Rm(MPa)	Rp0.2(MPa)	A(%)	Z (%)	AKV/AKU(J)	Hardness(HBW)
Q/T	690 ～ 830	≥ 590	≥ 11.0	-	≥ 41	205 ～ 250