Home / All / Steel Forgings / Round Forgings /

1045 G10450 1.1191 C45E S45C 1.0503 C45 Hot Forged Steel Round Bar

1045 G10450 1.1191 C45E S45C 1.0503 C45 Hot Forged Steel Round Bar

1045 G10450 1.1191 C45E S45C 1.0503 C45 Hot Forged Steel Round Bar
1045 G10450 1.1191 C45E S45C 1.0503 C45 Hot Forged Steel Round Bar1045 G10450 1.1191 C45E S45C 1.0503 C45 Hot Forged Steel Round Bar1045 G10450 1.1191 C45E S45C 1.0503 C45 Hot Forged Steel Round Bar1045 G10450 1.1191 C45E S45C 1.0503 C45 Hot Forged Steel Round Bar1045 G10450 1.1191 C45E S45C 1.0503 C45 Hot Forged Steel Round Bar
CategoriesRound Forgings
Brandfushun
Model1045 CK45 080M46 S45C
OD range:80-1200 mm
Delivery condition:hot forged+normalized
Surface condition:Black
FOB portSHANGHAI
Terms of PaymentL/C, D/A, D/P
Update TimeMar 28,2024
Detail Information

Introduce of 1.1191 steel:

DIN 1.1191 C45E Steel is a general carbon engineering steel according to DIN Germany standard. It’s one kind of high strength carbon steel which is mainly used after quenched and tempered. The 1.1191 steel has a certain shape and toughness and high strength. After QT, C45E steel can obtain good comprehensive mechanical properties. The welding performance of 1.1191 steel is not so good. This material needs to be preheated before welding, and carry on the annealing treatment after welding in order to eliminate the welding stress.

Applications of 1.1191 Steel:

DIN 1.1191 steel is applied to manufacture high strength movement parts,such as air compressor,piston pump,the impeller of a steam turbine,heavy duty and general machinery of the rolling shaft,connecting rod,worm,rack,gear,etc.

Chemical Composition of 1.1191 steel:

C: 0.42-0.50; Si: max0.40; Mn: 0.50-0.80; P: max0.030; S: max0.035; Cr: max0.40; Ni: max0.40; Mo: max0.10;

Equivalent Grades of 1.1191 steel:

AISI/ASTM: 1045, Germany: CK45, BS: 080M46, JIS: S45C, UNI: C45

Form of 1.1191 Steel:

Round / Square / Flat Bars, Shafts, Rollers, Blocks

Size of C45E Steel:

– As Forged
Round bar: Size: Dia.80-1,000mm, Length: 3,000-10,000mm
Square bar:Size: 150×150-600×600mm, Length: 3,000-8,000mm
(Forged Flat Bars, Shafts, Rollers and Blocks can be Customized)
– As Rolled
Round Bar
Size: Dia.10-300mm, Length: 3,000-10,000mm(can be Customized)

Mechanical Properties of C45E+QT:

Tensile strength: 600MPa
Yield point: 355MPa
Percentage reduction of area after fracture: 40%
Elongation after fracture: 16%
Impact test(+20°C): Transverse – 14J; Longitud – 39J

 

Quenched and Tempered (+QT) of 1.1191 Steel:
1. Increase the temperature slowly up to 840°C;
2. Soak at this hardening temperature and quench 1.1191 steel in the oil;
3. Cool down to 20°C in the air;
4. Heat uniformly to the tempering temperature of 600°C;
5. Hold at this temperature for 2 hours per 25mm thickness
6. Withdraw from the furnace and cool in the air.

 

Normalizing (+N) of DIN C45E Steel:
1)Heating din 1.1191 to 850°C;
2)Cool C45E material down to 20°C quickly in the air.

Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
CONTACT PERSON
Name:
Florence Tang
Tel:

86-731-89903933

Email:
Address:
ADD: No. 812-813, Floor 8, Building C2, Yongsheng Commercial Plaza, 222 Labor East Road, Yuhua District, Changsha City, Hunan, China.
NEWSLETTER

sign up for the latest catalogue, new design and promotion

follow us