Home > Products > Steel Bars > Bearing Steel Bar >

100CrMn6 1.3520 Bearing Steel Round Bar

100CrMn6 1.3520 Bearing Steel Round Bar

100CrMn6 1.3520  Bearing Steel Round Bar
CategoriesBearing Steel Bar
AlbumView larger image
Brandfushun
Model100CrMn6, 1.3520
Diameter20-180mm
Similar steel grades100CrMn6, 1.3520
Delivery conditionhot rolled+ spheroidizing annealing
Surface conditionblack, bright
FOB portShanghai
Terms of PaymentL/C, T/T
Update Time2019-08-17
Detail Information

Introduction:

Professional manufacturer of asphalt machines. Our sales and R&D team have over 10 years’ experience to focus on asphalt distributor, synchronous pavement surface vehicles and other road machinery and equipment. Based on innovation

Quality Standard:

DIN 17230-1980 Ball and Roller Bearing Steels

All Grades Comparison:

Material No. 1.3520; EN 100CrMn6

Chemical Composition(%):

C

Si

Mn

P

S

Cr

Ni

Cu

0.90-1.05

0.50-0.70

1.00-1.20

0.030 max

0.025 max

1.40-1.65

0.30 max

0.30 max

Heat treatment:

NORMALIZING: Normalizing temperature: 860-900℃.

SOFT ANNEALING: Heat to 760-800℃, cool slowly in furnace. This will produce a maximum Brinell hardness of 217.

STRESS RELIEVING: Stress relieving to remove machining stresses should be carried out by heating to approx. 650℃, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.

HARDENING: Harden from a temperature of 830-890℃ followed by oil quenching. Hardness after quenching is approx. 64 HRC.

TEMPERING: Tempering temperature: 150-180℃.

Please send your message to us
*Email
Tel
*Title
*Content

Agree to use terms of service

CONTACT PERSON
Florence Tang
leave a message:
Contact Now
Address:
Room 2014, 20th Floor, Building C1, Xuhui International Plaza, No. 222 of Naodong East Road, Changsha, Hunan, China
NEWSLETTER

sign up for the latest catalogue, new design and promotion

follow us