Home > Products > Steel Plate > High Speed Tool Steel Plates >

1.3247, M42 High Speed Steel Plate, Steel Sheet

1.3247, M42 High Speed Steel Plate, Steel Sheet

1.3247, M42 High Speed Steel Plate, Steel Sheet
1.3247, M42 High Speed Steel Plate, Steel Sheet1.3247, M42 High Speed Steel Plate, Steel Sheet1.3247, M42 High Speed Steel Plate, Steel Sheet1.3247, M42 High Speed Steel Plate, Steel Sheet
CategoriesHigh Speed Tool Steel Plates
AlbumView larger image
Brandfushun
Model1.3247, M42
Thickness1-16mm
Width810mm max
shapeSheet, plate
Surface ConditionBlack, Smooth, Bright
Delivery CondtionCold rolled+annealed, Hot rolled+annealed
FOB portShanghai
Terms of PaymentL/C, T/T
Update Time2019-01-21
Detail Information

Product:1.3247, M42 High Speed Steel Plate, Steel Sheet

 

Similar Grades: 1.3247, M42

 

Shape: Sheet, Plate

 

Steel-making Process: EF/EAF+LF+VD, EF/EAF+ESR 

 

Delivery condition: Cold Rolled+Annealed,  Hot Rolled+Annealed.

 

Surface condition: Black, Smooth, Bright

 

Chemical Composition:

 

Steel GradeCSiMnPSCrMoWVCo
1.32471.05-1.150.15-0.650.4max0.03max0.030max3.5-4.59.0-10.01.15-1.850.95-1.357.75-8.75
 

 

Standard: BS EN ISO 4957, ASTM A600

 

Size Range:

Thickness:1-16mm

Width:810mm max

Length:4000mm max 

 

Tolerance of Size:

Thickness 1.5-2.5mm with Tolerance (-0,+0.15) --Cold rolled plate

Thickness 2.55-16.0mm with Tolerance (-0,+0.25) --Hot rolled plate

 

Tolerance of Amount: Above prices are based on actual weight.

 

Shipping Marks:

1.3247

Thickness  MM * Width  MM

HEAT NO.:

N.W.:   

Made in China

 

Packing: IN BUNDLES, AND IN CONTAINER 20 FEET.     

 

 

Feature:

M42 high speed steel is highly Cobalt alloyed. The composition of M42 speed steel makes for a good combination of toughness and hardness. By virtue of these well-balanced properties M42 high speed steel has come into wide use for all cutting tools.

  • All-round applicability
  • Good machine-ability
  • Good performance
  • Good hot hardness
  • Good wear resistance

 

HEAT TREATMENT:

Heat treatment temperatures, including rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each M42 high speed steel component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities.
Forging: Pre heat the M42 high speed steel slowly and uniformly to 650-760°C and equalise. Then increase more quickly to the forging temperature of 1010-1150°C and equalise prior to forging. Do not allow the forging temperature to drop below 980°C, if this occurs re heating will be necessary. Always cool the high speed steel very slowly after forging.
Annealing: Annealing of M42 high speed steel is recommended after hot working and before rehardening. Heat the M42 high speed steel to 850°C at a rate of no more than 220°C per hour. Always hold at temperature for one hour per 25mm of thickness (with two hours being minimum). Furnace cool slowly. The M42 high speed steel annealed hardness achieved should be 269 Brinell or lower.
Stress Relieving: If tools produced from M42 high speed steel are heavily machined or ground it is recommended to stress relieve after machining and prior to hardening to minimise the possibility of distortion. To stress relieve heat the component to 600-650°C and soak well (approximately two hours) Cool slowly in the furnace. The M42 high speed steel tools can be finish machined before heat treatment.
Hardening: For best results harden in a vacuum or controlled furnace, or in a properly rectified salt bath. Pre heat thoroughly in two steps to 450-500°C, then to 820-870°C, transfer to the high temperature salt bath or furnace. The exact hardening temperature to use for M35 will depend on the type of work being treated, but in general components should be hardened from the range of 1050-1250°C.
Tempering: For best results harden the M42 high speed steel in a vacuum or controlled furnace, or in a properly rectified salt bath. Pre-heat the steel thoroughly to 820-870°C then transfer to the high temperature salt bath or furnace. The exact hardening temperature to use for M42 high speed steel will depend on the type of work being treated, but in general components should be hardened from the range of 1160-1180°C in salt, or 1180-1190°C in atmosphere or vacuum furnaces. After a short hold at the hardening temperature, quench the component without further soaking into salt at 540-595°C or warm oil. If salt quenched allow the component to equalise at the bath temperature and then complete the quench in still air.
Temperature [°C] 500 550 600
Hardness [HRc] 67 69 63

 

 

 Application:

HSS Circular Saw, Blade, Press Mould, Drills, End mill, Planer Knife, Chipper Knife, Slice Knife, Hss Square Tool Bits.



Introduction:
M42 high speed steel can be used in conditions where the demand for hot hardness is important. Commonly used for cutting tools including twist drills, taps, broaches tools, milling cutters, reamers, end mills, bandsaw blades, cold work tools, and thread rolling dies.

 

 

Please send your message to us
*We will reply your inquiry to this Email as soon as we see it
*Email
Name
Tel
*Title
*Content

Agree to use terms of service

CONTACT PERSON
Florence Tang
leave a message:
Contact Now
Address:
Room 1003, Building 22nd, Zhongcheng Lijing Xiangshan, No. 239, 2nd Part of Wanjiali Middle Road, Changsha, Hunan, China
NEWSLETTER

sign up for the latest catalogue, new design and promotion

follow us