Home > Products > Steel Bars > Hot Forged Steel Bars >

DIN 1.2365 AISI H10 Hot Work Tool Steel Round Bar

DIN 1.2365 AISI H10 Hot Work Tool Steel Round Bar

DIN 1.2365 AISI H10 Hot Work Tool Steel Round Bar
DIN 1.2365 AISI H10 Hot Work Tool Steel Round BarDIN 1.2365 AISI H10 Hot Work Tool Steel Round BarDIN 1.2365 AISI H10 Hot Work Tool Steel Round BarDIN 1.2365 AISI H10 Hot Work Tool Steel Round BarDIN 1.2365 AISI H10 Hot Work Tool Steel Round Bar
CategoriesHot Forged Steel Bars
AlbumView larger image
Brandfushun
ModelX32CrMoV12-28 / X32CrMoV33
Steel GradeDIN 1.2365 / AISI H10
ShapeRound bar/flat bar
Diameter80-500mm
Length2-5.8m
Unit PriceUS $ 2500 / metric ton
FOB portshanghai
Terms of PaymentL/C, D/A, D/P, T/T
Update Time2019-08-17
Detail Information

Product Description of 1.2365 steel:

Standards

DIN

AISI

JIS

ГОСТ

X32CrMoV12-28 / X32CrMoV33

1.2365

H10

SKD7

3Х3М3Ф

Chemical composition of 1.2365 steel (typical analysis in %)

C

Si

Mn

P

S

Cr

Mo

V

0.28-0.35

0.10-0.40

0.15-0.45

≤0.030

≤0.030

2.70-3.20

2.60-3.00

0.40-0.70

Applications of 1.2365 steel:

Tools for extrusion of copper and its alloys, aluminum and its alloys in a large-lot production, also the steel is appropriate for tools for hot cutting, for cutting thorns and trimming dies. The steel is also used for molds and their parts such as highly stressed firm and movable parts of molds, cores, sliders, distributors for pressure casting of products from copper and copper alloys or for a large-lot production of castings of a difficult shape from the aluminum and its alloys.

Steel properties of 1.2365 steel:

Tool steel for hardening in air or in oil with very good hardenability, with high resistance to the tempering, very good firmness during the heat and very good toughness and also resistance to tearing in consequence of thermal fatigue. The steel has a low sensitivity to quick changes of temperatures and is mainly suitable for tools cooled by water. It is well-workable during the heat and well-workable in the soft-annealed state.

Size range :

Diameter (mm)

Thickness (mm)

Width (mm)

6 - 500

6 - 400

Max 810

Soft annealing

Temperature(°C)

Cooling

Hardness

760 - 780

furnace

max. 230 HB

Forging

Temperature(°C)

Cooling

 

 

900 - 1050

furnace

Hardening

Temperature(°C)

Cooling

Tempering

 

1030 - 1050

oil or air or hot bath

see tempering diagram

Please send your message to us
*Email
Tel
*Title
*Content

Agree to use terms of service

CONTACT PERSON
Florence Tang
leave a message:
Contact Now
Address:
Room 2014, 20th Floor, Building C1, Xuhui International Plaza, No. 222 of Naodong East Road, Changsha, Hunan, China
NEWSLETTER

sign up for the latest catalogue, new design and promotion

follow us